Step By Step How to Format Tecno P3 Hard Reset and Soft Reset

Cautions Before The Hard Reset ::

  • For Completing the Format Tecno P3  hard reset Code Process it took some time to complete so First charge your battery,
  • backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
  • SuperGeekForum Suggest Backup For all of your Tecno P3 befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
  • Because It is impossible to recover your data from your Tecno P3  after doing a Format or hard reset, so online backup is always important.
  • So keep backup first
  • and if phone hangs then try to press and hold the power key  of your Tecno P3 for about one minute phone will restart it will solve most issues.

Soft Format Tecno P3 Soft reset By Menu Setting Options

  • Go to the Main Menu find and select Settings
  • open the Backup and Reset folder and select Factory Data Reset.
  • tap Reset Phone and read the warning when it pops up. and select erase everything.
  • that’s all reset done

Soft Reset ::  Format Tecno P3

Soft Reset TECNO P3 First method:

  1. Start by pressing and holding the Power button. Hard Reset TECNO P3
  2. From the menu which should appear on the screen choose Power Off and then tap OK
  3. Wai a couple of seconds.
  4. Press the Power button again to swtich the device backo on. Hard Reset TECNO P3

Second method:

  1. Remove the back cover and the battery from the cell phone.
  2. Wait about 10 seconds.
  3. Put the battery and the cover back in.
  4. Turn on the device by holding the Power buttonHard Reset TECNO P3

WARNING !

/”/#/devices/tecno/tecno-p3/error/?in=softreset_en”>

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

How to Format Tecno P3 hard reset ::

Hard Reset TECNO P3

  1. In order to switch the device on press and hold the Power key for a short while.Hard Reset TECNO P3
  2. From the home screen open Menu.HardReset TECNO P3
  3. Then find and choose Settings.
  4. In the next step select Privacy and tap Factory data reset.
  5. Afterwards choose Reset Phone.
  6. Select Erase everything to confirm the whole operation.
  7. Well done! The hard reset has just been performed.

WARNING !

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

More Tips If This doesn’t work

Warning! for Format & Reset Tecno P3 ::

  • It’s all your responsibility to Hard Reset or Format or Root or Unlock  your phone we are not responsible for any kind of loss to you or your Mobile.
  • By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.

That’s all now the format,root, unlock, Tecno P3 recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem

We would like to keep you updated with special notifications.