How to Hard Reset and Soft Reset Wiko Pulp

Step By Step How to Format Wiko Pulp Hard Reset and Soft Reset

Cautions Before The Hard Reset ::

  • For Completing the Format Wiko Pulp  hard reset Code Process it took some time to complete so First charge your battery,
  • backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
  • SuperGeekForum Suggest Backup For all of your Wiko Pulp befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
  • Because It is impossible to recover your data from your Wiko Pulp  after doing a Format or hard reset, so online backup is always important.
  • So keep backup first
  • and if phone hangs then try to press and hold the power key  of your Wiko Pulp for about one minute phone will restart it will solve most issues.

Soft Format Wiko Pulp Soft reset By Menu Setting Options

  • Go to the Main Menu find and select Settings
  • open the Backup and Reset folder and select Factory Data Reset.
  • tap Reset Phone and read the warning when it pops up. and select erase everything.
  • that’s all reset done

Soft Reset ::  Format Wiko Pulp

Soft Reset WIKO Pulp First method:

  1. At the beginning press and hold the Power button. Hard Reset WIKO Pulp
  2. From the options choose Power Off and then tap OK.
  3. You ought to wait a couple of seconds.
  4. Finally, use the Power key again to turn the phone back on. Hard Reset WIKO Pulp

Second method:

  1. Remove the back cover and the battery for a short while. 
  2. Put the battery and the cover back in. 
  3. Turn on the phone by holding the Power buttonHard Reset WIKO Pulp

Remove Battery WIKO Pulp FAB 4G – Soft Reset

WARNING !

/”/#/devices/wiko/wiko-pulp/error/?in=softreset_en”>

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

How to Format Wiko Pulp hard reset ::

Hard Reset WIKO Pulp First method:

  1. The device must be turned off, so press and hold Power key for a short while.
  2. After that, hold down for a couple of seconds three buttons: Volume Up + Volume Down + Power.
  3. You should release held keys when you see a menu with two options.
  4. In the next step press the Volume Up button to enter Android System Recover.
  5. Select the “Wipe data / Factory reset” by using the Volume buttons and press the Power key for confirmation.
  6. Then choose “Yes–delete all user data“. Use Volume Down to scroll and Power button to select.
  7. To restart the phone, select “Now you can reboot Your system “.
  8. Excellent! The hard reset has just been performed.

Second method:

  1. If the cell phone is off, hold down the Power button to turn it back on.
  2. Afterwards go to Settings and then to Backup & Reset.
  3. In the next step find and select Factory data reset.
  4. Then, choose Reset device and select Erase everything.
  5. Good job! your phone is ready to work.

How to Hard Reset WIKO Pulp FAB – FACTORY RESET in WIKO

Hard Reset WIKO Pulp – REMOVE PATTERN IN WIKO

Hard Reset WIKO Pulp FAB – REMOVE PASSWORD / PATTERN

WARNING !

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

More Tips If This doesn’t work

Warning! for Format & Reset Wiko Pulp ::

  • It’s all your responsibility to Hard Reset or Format or Root or Unlock  your phone we are not responsible for any kind of loss to you or your Mobile.
  • By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.

That’s all now the format,root, unlock, Wiko Pulp recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem