Article Contents ::
- 1 Step By Step How to Format Micromax Bolt Warrior 2 Q4202 Hard Reset and Soft Reset
- 2 Cautions Before The Hard Reset ::
- 3 Soft Format Micromax Bolt Warrior 2 Q4202 Soft reset By Menu Setting Options
- 4 Soft Reset :: Format Micromax Bolt Warrior 2 Q4202
- 5 WARNING !
- 6 How to Format Micromax Bolt Warrior 2 Q4202 hard reset ::
- 7 WARNING !
- 8 Warning! for Format & Reset Micromax Bolt Warrior 2 Q4202 ::
Step By Step How to Format Micromax Bolt Warrior 2 Q4202 Hard Reset and Soft Reset
Cautions Before The Hard Reset ::
- For Completing the Format Micromax Bolt Warrior 2 Q4202 hard reset Code Process it took some time to complete so First charge your battery,
- backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
- SuperGeekForum Suggest Backup For all of your Micromax Bolt Warrior 2 Q4202 befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
- Because It is impossible to recover your data from your Micromax Bolt Warrior 2 Q4202 after doing a Format or hard reset, so online backup is always important.
- So keep backup first
- and if phone hangs then try to press and hold the power key of your Micromax Bolt Warrior 2 Q4202 for about one minute phone will restart it will solve most issues.
Soft Format Micromax Bolt Warrior 2 Q4202 Soft reset By Menu Setting Options
- Go to the Main Menu find and select Settings
- open the Backup and Reset folder and select Factory Data Reset.
- tap Reset Phone and read the warning when it pops up. and select erase everything.
- that’s all reset done
Soft Reset :: Format Micromax Bolt Warrior 2 Q4202
Soft Reset MICROMAX Bolt Warrior 2 Q4202
- First of all, press and hold the Power button.
- Next, from the menu that should appear on the screen choose Power Off and then tap OK.
- Wait a couple of seconds.
- In the last step hold down the Power key again to switch the device back on.
WARNING !
/”/#/devices/micromax/micromax-bolt-warrior-2-q4202/error/?in=softreset_en”>
This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.
How to Format Micromax Bolt Warrior 2 Q4202 hard reset ::
Hard Reset MICROMAX Bolt Warrior 2 Q4202 First method:
- Begin by holding down the Power key in order to switch off the cell phone.
- After that, press and hold together the Volume Up + Power key for a few seconds.
- Let go of all keys as soon as the Android Robot pops up.
- Hold down the Power key in order to go into Recovery Mode.
- While holding Power key press Volume Up button once.
- Then use Volume buttons to select “wipe data/factory reset” and tap the Power button to confirm.
- Afterwards choose “yes” from the menu, and accept it with Power button.
- As soon as the Recovery Mode appears again on the screen accept option “Now you can reboot Your system ” using Power rocker.
- Excellent! The factory reset operation should be completed.
Second method:
- At the very beginning hold down the Power key for a a short while
- Afterawrds from Main Menu find and select Settings.
- Then open the Backup and Reset folder and select Factory Data Reset.
- In the next step tap Reset Phone and read the warning when it pops up.
- Choose Erase Everything and the phone will begin restoring.
- Success! The hard reset is done.
Third method:
- First of all, downlad and install the ADB drivers and Android Multi Tools on your computer.
- Switch off the device by holding down the Power key for a few seconds.
- Afterwards press and hold the Volume Down and Power button untill phone goes to Fastboot Mode.
- Connect the phone with your computer via the USB cabel.
- In the next step run the Android Multi Tools.
- Then from the available options select Wipe Data/Cache.
- Good job! The factory reset is done.
WARNING !
This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.
More Tips If This doesn’t work
Warning! for Format & Reset Micromax Bolt Warrior 2 Q4202 ::
- It’s all your responsibility to Hard Reset or Format or Root or Unlock your phone we are not responsible for any kind of loss to you or your Mobile.
- By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.
That’s all now the format,root, unlock, Micromax Bolt Warrior 2 Q4202 recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem