How to Hard Reset and Soft Reset Panasonic Eluga Mark 2

Step By Step How to Format Panasonic Eluga Mark 2 Hard Reset and Soft Reset

Cautions Before The Hard Reset ::

• For Completing the Format Panasonic Eluga Mark 2  hard reset Code Process it took some time to complete so First charge your battery,
• backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
• SuperGeekForum Suggest Backup For all of your Panasonic Eluga Mark 2 befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
• Because It is impossible to recover your data from your Panasonic Eluga Mark 2  after doing a Format or hard reset, so online backup is always important.
• So keep backup first
• and if phone hangs then try to press and hold the power key  of your Panasonic Eluga Mark 2 for about one minute phone will restart it will solve most issues.

Soft Format Panasonic Eluga Mark 2 Soft reset By Menu Setting Options

• Go to the Main Menu find and select Settings
• open the Backup and Reset folder and select Factory Data Reset.
• tap Reset Phone and read the warning when it pops up. and select erase everything.
• that’s all reset done

Soft Reset ::  Format Panasonic Eluga Mark 2

Soft Reset PANASONIC Eluga Mark 2 First method:

1. First of all, press and hold the Power button. 
2. From the options choose Power Off and then tap OK.
3. You should wait a couple of seconds.
4. Finally, hold down the Power key again to turn the phone back on.

Second method:

1. Remove the back cover and the battery for a short while. 
2. Put the battery and the cover back in.
3. You have to wait about 10 seconds.
4. Finally, switch on the phone by holding the Power button. 

WARNING !

/”/#/devices/panasonic/panasonic-eluga-mark-2/error/?in=softreset_en”>

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

How to Format Panasonic Eluga Mark 2 hard reset ::

Hard Reset PANASONIC Eluga Mark 2 First method:

1. First of all, hold down the Power button for a short while in order to switch off the device.
2. Next, press and hold together the Volume Up and Power key for a few seconds.
3. Release the Power key when you see an Android icon.
4. When the Android System Recovery pops up release the Volume Up key.
5. Then use Volume buttons to select “wipe data/factory reset” and tap the Power button to confirm.
6. Afterwards choose “yes” from the menu, and accept it with Power button.
7. Finally, accept option “Now you can reboot Your system ” by using Power rocker.
8. Wait until the Welcome Panel pops up.
9. Good job! The factory reset operation should be completed.

Second method:

1. At the very beginning hold down the Power button to switch on your device.
2. Find and select Settings then open the Backup and Reset folder .
3. In the next step choose Factory Data Reset.
4. Then tap Reset Phone and read the warning when it pops up. 
5. Finally, choose Erase Everything and the phone will begin restoring.
6. Success! The factory reset is done.

This is How simply You Can Hard reset The Device for More you can Follow Us on Social Sites Facebook SuperGeekForum, Twitter

WARNING !

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

More Tips If This doesn’t work

Warning! for Format & Reset Panasonic Eluga Mark 2 ::

• It’s all your responsibility to Hard Reset or Format or Root or Unlock  your phone we are not responsible for any kind of loss to you or your Mobile.
• By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.

That’s all now the format,root, unlock, Panasonic Eluga Mark 2 recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem