Step By Step How to Format Zte Blade A610 Hard Reset and Soft Reset

Cautions Before The Hard Reset ::

  • For Completing the Format Zte Blade A610  hard reset Code Process it took some time to complete so First charge your battery,
  • backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
  • SuperGeekForum Suggest Backup For all of your Zte Blade A610 befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
  • Because It is impossible to recover your data from your Zte Blade A610  after doing a Format or hard reset, so online backup is always important.
  • So keep backup first
  • and if phone hangs then try to press and hold the power key  of your Zte Blade A610 for about one minute phone will restart it will solve most issues.

Soft Format Zte Blade A610 Soft reset By Menu Setting Options

  • Go to the Main Menu find and select Settings
  • open the Backup and Reset folder and select Factory Data Reset.
  • tap Reset Phone and read the warning when it pops up. and select erase everything.
  • that’s all reset done

Soft Reset ::  Format Zte Blade A610

No Data Available this Time

How to Format Zte Blade A610 hard reset ::

Hard Reset ZTE Blade A610 First method:

  1. Firstly, switch off the phone by using the Power button.Hard Reset ZTE Blade A610
  2. Then press and hold together Volume Up and Power key for a few seconds.HardReset ZTE Blade A610
  3. Release held keys when you see the Boot Mode in front of you.Remove screen password ZTE Blade A610
  4. Scroll down to Recovery by using the Volume Up and press Volume Down button to confirm it.
  5. In order to open the Recovery Mode menu hold down the Power key for a short while.Hard Reset ZTE Blade A610
  6. While holding the Power key press the Volume Up once.HardReset ZTE Blade A610
  7. In the next step use Volume buttons to select “wipe data/factory reset” and tap the Power button to confirm.Wipe data ZTE Blade A610
  8. Afterwards choose “yes” from the menu, and accept it with Power button.Master Reset ZTE Blade A610
  9. When a Recovery Mode appears again on the screen accept option “Now you can reboot Your system ” using Power rocker.Factory Reset ZTE Blade A610
  10. That’s all. The hard reset operation should be completed.

Second method:

  1. Firstly press the Power button, until your device is on.Hard Reset ZTE Blade A610
  2. From the home screen open Menu and choose Settings.
  3. After that select Backup&Reset and tap Factory data reset.Format ZTE Blade A610
  4. Choose Reset phone and select Erase everything to begin hard reset operation.Restore ZTE Blade A610
  5. Success! The hard reset is done!

Third method:

  1. The cell phone must be turned off so hold down the Power rocker for a short while.Hard Reset ZTE Blade A610
  2. After that press and hold the Volume Down Power button simultaneously for about 10 seconds.Remove Screen Lock ZTE Blade A610
  3. In order to choose “Clear eMMC” use the Volume Down to navigate and the Power button to confirm.Permanently delete data from ZTE Blade A610
  4. Success! Your phone should begin the hard reset operation.

Fourth method:

  1. Begin by pressing and holding the Power button in order to switch off the device.Hard Reset ZTE Blade A610
  2. Afterwards hold down once more the Power key in order to turn the phone back on.Hard Reset ZTE Blade A610
  3. Choose emergency dial, and type the following number: *983*22387#
  4. Then from the menu in front of you choose Erase Everything.
  5. Good job! Your phone should restart itself right now.

WARNING !

This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.

More Tips If This doesn’t work

Warning! for Format & Reset Zte Blade A610 ::

  • It’s all your responsibility to Hard Reset or Format or Root or Unlock  your phone we are not responsible for any kind of loss to you or your Mobile.
  • By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.

That’s all now the format,root, unlock, Zte Blade A610 recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem

We would like to keep you updated with special notifications.