Step By Step How to Format Zte Blade A462 Hard Reset and Soft Reset
Cautions Before The Hard Reset ::
- For Completing the Format Zte Blade A462 hard reset Code Process it took some time to complete so First charge your battery,
- backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
- SuperGeekForum Suggest Backup For all of your Zte Blade A462 befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
- Because It is impossible to recover your data from your Zte Blade A462 after doing a Format or hard reset, so online backup is always important.
- So keep backup first
- and if phone hangs then try to press and hold the power key of your Zte Blade A462 for about one minute phone will restart it will solve most issues.
Soft Format Zte Blade A462 Soft reset By Menu Setting Options
- Go to the Main Menu find and select Settings
- open the Backup and Reset folder and select Factory Data Reset.
- tap Reset Phone and read the warning when it pops up. and select erase everything.
- that’s all reset done
Soft Reset :: Format Zte Blade A462
No Data Available this Time
How to Format Zte Blade A462 hard reset ::
Hard Reset ZTE Blade A462 First method:
- Firstly, switch off the phone by using the Power button.
- In the next step press and hold together the Volume Up and Power key for a few seconds.
- Release held keys when you see the Boot Mode in front of you.
- Scroll down to Recovery by using the Volume Up and press Volume Down button to confirm it.
- In order to open the Recovery Mode menu hold down the Power key for a short while.
- While holding the Power key press the Volume Up once.
- In the next step use Volume buttons to select “wipe data/factory reset” and tap the Power button to confirm.
- Afterwards choose “yes” from the menu, and accept it with Power button.
- When a Recovery Mode appears again on the screen accept option “Now you can reboot Your system ” using Power rocker.
- That’s all. The hard reset operation should be completed.
- Firstly press the Power button, until your device is on.
- From the home screen open Menu and choose Settings.
- After that select Backup&Reset and tap Factory data reset.
- Choose Reset phone and select Erase everything to begin hard reset operation.
- Success! The hard reset is done!
- The cell phone must be turned off so hold down the Power rocker for a short while.
- After that press and hold the Volume Down + Power button simultaneously for about 10 seconds.
- In order to choose “Clear eMMC” use the Volume Down to navigate and the Power button to confirm.
- Success! Your phone should begin the hard reset operation.
- Begin by pressing and holding the Power button in order to switch off the device.
- Afterwards hold down once more the Power key in order to turn the phone back on.
- Choose emergency dial, and type the following number: *983*22387#
- Then from the menu in front of you choose Erase Everything.
- Good job! Your phone should restart itself right now.
This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.
Warning! for Format & Reset Zte Blade A462 ::
- It’s all your responsibility to Hard Reset or Format or Root or Unlock your phone we are not responsible for any kind of loss to you or your Mobile.
- By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.
That’s all now the format,root, unlock, Zte Blade A462 recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem