Article Contents ::
- 1 Step By Step How to Format Qtek 1020 Htc Wallaby Hard Reset and Soft Reset
- 2 Cautions Before The Hard Reset ::
- 3 Soft Format Qtek 1020 Htc Wallaby Soft reset By Menu Setting Options
- 4 Soft Reset :: Format Qtek 1020 Htc Wallaby
- 5 WARNING !
- 6 How to Format Qtek 1020 Htc Wallaby hard reset ::
- 7 WARNING !
- 8 Warning! for Format & Reset Qtek 1020 Htc Wallaby ::
Step By Step How to Format Qtek 1020 Htc Wallaby Hard Reset and Soft Reset
Cautions Before The Hard Reset ::
- For Completing the Format Qtek 1020 Htc Wallaby hard reset Code Process it took some time to complete so First charge your battery,
- backup your important data if possible and in most cases take out SIM and SD card. Because your data cant be recovered from phone if once lost during the reset process.
- SuperGeekForum Suggest Backup For all of your Qtek 1020 Htc Wallaby befor hard reset data, a backup should be done on an external device, hard drive, raid system or media.
- Because It is impossible to recover your data from your Qtek 1020 Htc Wallaby after doing a Format or hard reset, so online backup is always important.
- So keep backup first
- and if phone hangs then try to press and hold the power key of your Qtek 1020 Htc Wallaby for about one minute phone will restart it will solve most issues.
Soft Format Qtek 1020 Htc Wallaby Soft reset By Menu Setting Options
- Go to the Main Menu find and select Settings
- open the Backup and Reset folder and select Factory Data Reset.
- tap Reset Phone and read the warning when it pops up. and select erase everything.
- that’s all reset done
Soft Reset :: Format Qtek 1020 Htc Wallaby
Soft Reset QTEK 1020 (HTC Wallaby) First method:
- Open the Stylus and use the half with smaller point.
- Use Stylus and putit into the hole on the bottom right side of the phone (on the picture).
- Done, ur device must reboot now.
Second method:
- Start by opening back of handset.
- Remove battery and wait 5 to 10 seconds.
- Then shove battery back again in device.
- Press the Power button and wait for device to startup.
- From this moment phone should restart and will be ready to use.
WARNING !
/”/#/devices/qtek/qtek-1020-htc-wallaby/error/?in=softreset_en”>
This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.
How to Format Qtek 1020 Htc Wallaby hard reset ::
Hard Reset QTEK 1020 (HTC Wallaby)
- Take the Stylus and use the half with smaller point.
- Use it and put in Battery switch , device will now power off.
- Now put Stylus again in Battery switch to startup handset.
- Then HTC device should boot up to make Factory reset.
WARNING !
This Hard Reset Process will erase all data from Your Mobile Phone The Above Hard Reset Process may harm your device you are doing at your own risk.
More Tips If This doesn’t work
Warning! for Format & Reset Qtek 1020 Htc Wallaby ::
- It’s all your responsibility to Hard Reset or Format or Root or Unlock your phone we are not responsible for any kind of loss to you or your Mobile.
- By performing “Factory Reset“, all user data will be ERASED. You MUST took a proper backup PRIOR to running factory reset & Web update.
That’s all now the format,root, unlock, Qtek 1020 Htc Wallaby recovery mode format Soft Reset Code device is rooted perfectly without any problems. In case if you find any issues with above procedure comment here. SuperGeekForum will try to solve your problem